SA-3 cylinder shape burrs are ideal for interior contour work and deburring. Because of the extreme hardness of the tungsten carbide, technology-not only on considerably more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials for example stone, plastics, hard wood, and ceramic. Double cut burrs leaves a rather smoother finish than single cut on account of producing smaller chips as they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and will see you through most applications.
Machines Used On:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are great for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is determined with the material you use your burr on. If you might be experiencing chipping, you are most probably operating at too much of speed for the application. Start having a slower speed and increase as you go along and soon you attain the best results
Apply light pressure and permit the tool perform the work. Bearing upon the tool can result in reduced tool life as well as a dull burr.
Always wear proper PPE to add (and not restricted to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards available on the machine.
Avoid experience electrical power drills; the slower speeds may lead to chipping of your respective workpiece.
To read more about SA-3 Carbide Burrs see the best web page