Use tungsten carbide burrs on hard materials including steel, aluminum and certain, all kinds of stone, ceramic, porcelain, real wood, acrylics, fibreglass and reinforced plastics. When suited for soft metals like gold, platinum and silver, carbide burrs are excellent since they lasts for a long time without any breaking or chipping.
Different cuts of carbide burrs is going to be suitable for several materials.
Ways to use SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools like die grinders, pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools such as a Dremel.
Carbide burrs are widely used for metalworking, tool making, engineering, model engineering, wood carving, jewelry creation, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are used within the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut if you choose?
Single cut (one flute) carbide burrs possess a right handed (up cut) spiral flute. Single cut is employed with stainless-steel, hardened steel, copper, iron and ferrous metals and may remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removal of material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel as well as all non-metal materials like stone, plastics, real wood and ceramic. This cut has more cutting edges and definately will remove material faster. Double cut also known as Diamond Cut or Cross Cut (2 flutes cut across one another) and will leave a smoother finish than single cut due to producing smaller chips as they cut away the fabric. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are most popular and benefit most applications.
Medium- light removal of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed should you use?
The velocity where you have your carbide burr inside your rotary tool is determined by the fabric you’re making use of it on and the contour being produced but it’s reliable advice you don’t need a lot more than 35,000 RPM. If your burs are chipping easily this could be as a result of speed being too slow. It’s ideal to start the bur off slow, helping the speed during this process. High speeds prevents clogging within the flutes of your carbide burs.
Like all drill bits and burrs, permit the burr carry out the work and apply only a little pressure, otherwise the cutting edges in the flutes will chip away or become smooth too quickly, lowering the lifetime of your burr.
For more information about SB-3 Carbide Burrs see the best net page