Knowing how to choose the best carbide burr for you is usually a challenge. Have a look at have laid our helpful information for demonstrate how to pick the right carbide burr for your application.
Why use Diamond Cut Carbide Burrs?
Diamond cut burrs possess a large number of small cutting edges which will make them perfect for use on any ‘hard’ material surface.
Use diamond cut burrs on metals such as steel, stainless-steel and titanium
Diamonds cut burr ensures rapid, low vibration cutting
Suitable for eliminating machine marks
Why use Fluted Cut Carbide Burrs?
To be used on non ferrous metals, woods and plastics
The open fluted cut face aids fast swarf removal on soft materials including aluminium and soft plastics
How do you differentiate between Diamond Cut and Fluted Cut?
You can easily differentiate between the two types of carbide burrs.
Visually, the Fluted Cut carbide burrs have a more distinctive face with clear cuts for the burr. The Diamond Cut has more cutting area on the burr because it is utilized on hard metals.
When Should I Use my Carbide Burr?
There are many jobs that carbide burrs can be used for, just be sure you help the best type!
Descaling an item of metal
Removing/stripping metal in which the finish isn’t important
Removing machining marks
Adding detail to wood carvings (Fluted Cut)
How to Handle Carbide Burrs: Safety Procedures
Constantly enhancing your working environment commences with taking precautions to guard both yourself along with the solid carbide burr. If you take the appropriate health concerns, you could prevent mishaps that involve you together with the instrument, along with damages to both. When precautions are taken, unfortunate events like accidents, diseases, and even deaths could be avoided, as well as a host of other avoidable disasters.
Consider the following precautions before to and during the operation:
If you wish to keep the solid carbide burr in good condition, make sure the work material is firmly fastened within a sturdy workstation. Additionally, you protect yourself from harm.
Always check to see that this burr shank you’re using may be properly place into the collet and that the collet is securely clamped.
Squeeze carbide burr’s shank in the chuck with the air tool inside the right orientation and be sure that it is securely secured there.
When dealing with the fabric, the carbide burr doesn’t get caught on anything or become jammed. Because of this, the flutes dwindle sharp after a while since they chip away.
Keep your carbide burr moving and don’t give your mind wander from your material you’re taking care of. Also, make sure you wear protective equipment that covers the eyes, face, and hands.
Because on the increased gravity in the carbide burr, more caution is essential while working with big materials.
Sometimes the carbide burr gets hotter, which then causes twilight and mist to look. Some may inflict severe damage whenever they were to be ingested, breathed in, or landed of the epidermis or eyes. Always proceed with warning.
Places with proper ventilation ought to be utilized for the project’s work.
To read more about SC-3 Carbide Burrs check out our website