We have found a directory of the most prevalent shapes of carbide burrs:
Cylinder end-cut shape
Cylinder end-cut shape contains a flat end which is helpful for working on materials who have right angles along with eliminating features. In the process of completing contours on materials, a well known solid carbide burr. Flat surfaces are taken out of many materials. Carbide cylindrical form end cut burs may be used for either end or side cutting because of their versatile nature. Deburring and polishing flat bottom holes and slots are two common applications on their behalf.
Cone shape
Deburring gear teeth, heat exchanger fan blades, inner bevel edges, and internal pipe edges are the applications for which cone-shaped carbide burrs are developed. The exact same function as a countersink, and also chamfers the inside of holes deliberately.
Taper shape
The removing of round features from a workpiece produces a product that is a lot more seamless. A functional instrument that is in a position to access restricted locations and machine material surfaces
Flame shape
When cutting materials with round edges, work with a carbide burr the same shape as a flame. The flame kind of carbide burrs is intended for use in deburring and polishing elliptic surfaces on steel dies, forgings, castings, and metal patterns.
Tree shape
as being a tree in appearance but a clear, crisp tip at the top. The round edges are ground by the compilation of carbide burrs in succession. This type makes it possible to easily access lengthy, tight locations are inaccessible together with the most of the other shapes. Deburring and completing the deep contoured surfaces of steel dies, moulds, and metal patterns include the primary functions that Tree Shape carbide burrs are meant to do. Like be used to restore damaged places on dies which were brought on by slugs.
Oval shape
As you still develop assembling your project, this perfect carbide burr efficiently clears round edges around the workpiece that’s been handed to you. Oval-shaped carbide burs can be used for deburring and polishing curved surfaces in steel dies, forgings, castings, and metal patterns. These burs are created from an oval cross-section. They are acustomed for that technique of treating difficult fillet welds.
Ball shape
Carbide Deburring round bottom holes, curved slots, and curved metal and material surfaces are one of the applications in which ball-shaped burs were devised. Likewise, you need to use these to widen or lengthen skin pores so that you can treat hard fillet welds. The sleek machining of all round edges of workpieces, as well as the preparation of workpieces for brazing, is manufactured possible with the ball shape.
More info about SB-9 Carbide Burrs check out our resource