Carbide burrs are tools utilized for deburring most hard materials like ceramics, stone, steel, aluminum, plastics and hardwood. They offer precision, and may also be employed in cutting, shaping, grinding and chamfering hard materials.
Carbide burrs may be used on the variety of materials for example metals (including Steel aluminum and surefire) and all sorts of types of wood. You can use it on acrylics, fiberglass and plastics too. Carbide burrs will last for quite a long time without chipping or breaking so that it’s so excellent to use them on soft metals like gold,platinum and silver.
What are Benefits of Carbide Burrs In comparison with HSS Burrs?
In contrast to HSS, Carbide Burrs are much harder.
The Tungsten Carbide is very hard to be able to be used in wider variety of work than HSS (High Speed Steel).
HSS can’t be as good as carbide burrs when they are at temperature. Carbide Burrs can bear hotness and can run longer time.
Carbide won’t soften at temperature but HSS burrs is opposite. It is obvious that carbide is a better choice.
Using Carbide Burs:
For more stability, insert the accessory bit into the tool and then back it out slightly before tightening around the collet nut or keyless chuck.
Avoid the use of these for drilling holes or enlarging holes which are under twice the diameter in the cutter. The tungsten carbide surface can certainly catch the side of your hole and break the part.
Use higher speeds for hardwoods, slower speeds for metals and slow speeds for plastics (to avoid melting at contact point).
Start at the lower speed. Then increase on the speed that offers the most favourable results.
Tend not to apply excessive pressure. It could reduce the spindle and chip cutting edges. Just let the bur carry out the cutting.
Make use of the sides in the cutter for effective cutting. The top cuts poorly and may break under time limits.
Never in-capsulate the bur within the cut. If chattering occurs, increase speed.
When you use aluminium and magnesium, consider some sort of lubricant, wax or tallow, since it will help prevent the flutes from loading or packing.
Carbide burs, if used the appropriate way, will outperform HSS burs by 50
For more details about SD-51 Carbide Burrs just go to this web site