SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Due to the extreme hardness of the tungsten carbide, quite a few on much more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are generally suited for ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials for example stone, plastics, hard wood, and ceramic. Double cut burrs will leave a rather smoother finish than single cut on account of producing smaller chips while they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and may view you through most applications.
Machines Suited for:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Surefire, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are perfect for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is decided from the material you use your burr on. If you’re experiencing chipping, you are most probably operating at excessive of speed for the application. Start using a slower speed while increasing on the way unless you attain the the best results
Apply light pressure and allow tool carry out the work. Bearing documented on the tool will lead to reduced tool life plus a dull burr.
Always wear proper PPE to add (although not tied to) safety glasses, hearing protection, respirator, and baseball gloves. Keep all guards available on the machine.
Avoid experience electrical power drills; the slower speeds can lead to chipping of the workpiece.
For more information about SA-3 Carbide Burrs take a look at this popular web portal