Among the first things the do-it-yourselfer realizes while studying how to construct a drywall ceiling is always that no man is surely an island – unless he makes use of rented equipment! For the reason that panels are big, bulky, and awkward, hanging drywall over a ceiling entails either: the aid of someone else or renting a drywall jack from your local hardware store. The cable mechanism on drywall jacks is just not challenging to operate, and jacks do a fantastic job of holding the drywall in the secure, flat position making it possible to easier attach it to the ceiling.
Tools & Materials
Building a Ceiling Drywall Installation includes being aware of what all tools and material you’ll need. As well as either someone else that will help you or possibly a drywall jack, you can also need to have a hammer, a drill having a screwdriver bit, and nails or screws for drywall. Included in the package, needless to say, must measure your ceiling (twice!) and buying enough drywall, with a little extra in the event of mistakes, for the job.
Mark Joists First
Get the boards – usually 2x4s or 2x6s – that serve as ceiling joists by tapping down the wall studs having a hammer and following up the wall to the ceiling. In learning how to build a drywall ceiling, mark where these boards are placed having a pencil. They are what you will be attaching the drywall to and marking them beforehand helps it be much easier to locate them than attempting to find them when you are nailing or screwing about the drywall. Then you definately must measure the location where the light fixture proceeds the drywall and eliminate a dent to support that section of the ceiling.
The hard Part
Its part in learning how to construct a drywall ceiling where you’ll need the other person (who hopefully has a lot of stamina in addition to strength!) to support the drywall to the ceiling or to put the drywall panel about the jack. Placed the end of the sheet of drywall – with its finished side facing down – at the center of the ceiling board (joist) to which you will nail it. Nail across the outside the panel about a half an inch through the edges to stop the drywall from splitting or cracking. The one that is holding the panel are now able to move or, in case you are using a jack, you’ll be able to move it out of methods.
Ensure it is Pretty
Countersink nails or screws at six- or seven-inch intervals all down the length of the joist to which the drywall may be attached. Countersinking enables you to cover up the heads of the nails/screws with compound to ensure that whenever you paint, the heads won’t be in any respect visible. Although not a real a part of understanding how to build a drywall ceiling, learning how to cover up ugly nail or screw heads serves its very own purpose for overall general carpentry knowledge.
For more info about Ceiling Drywall Installation visit our new internet page: look at this